70 sqmm Cable Lug with Dual Flange Holes 2D Technical Drawing Set

Shows the full axial profile: cable insertion end, transition cone, and barrel length. Critical for verifying insertion depth and overall length. The Front_Hidden view confirms internal bore continuity and wall thickness at the transition.

Reveals the flange geometry, two mounting holes (6.4 mm diameter), and the 70qmm marking. Essential for locating the bolt pattern and verifying hole center-to-center spacing and flange width.

Shows the cylindrical barrel’s outer diameter (16.5 mm), wall thickness, and internal bore (12.0 mm ID). The Right view is necessary because the barrel is not circular in the Front view due to the conical transition, and the internal bore is only visible here.

A longitudinal section through the centroid (X = 38.1 mm) reveals the internal bore diameter (12.0 mm), wall thickness (e.g., 2.25 mm at mid-flange), and the conical transition geometry. This is essential for verifying internal clearance and wall integrity.