AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the face-on view of the connector with both large contact holes (3.5mm diameter) and two smaller contact holes (visible in center), plus the overall rectangular profile and rounded left edge. Essential for understanding the contact layout and overall width/height.
Reveals the cylindrical barrel structure with threaded contact pins protruding upward, the 'Amass' branding, and the overall depth/length of the connector body. Critical for understanding the 3D form and pin arrangement.
Shows the side profile with the cylindrical barrel body, the threaded contact pin on the left, and the overall length and diameter of the main housing. Provides essential depth and length dimensions.
Vertical section through the center (YZ plane) reveals the internal bore structure of the cylindrical barrel (diameter ~10mm outer, ~7.4mm inner), the contact pin channels (2.0mm diameter), and the wall thickness of the housing (~1.2mm). Shows the internal cavity structure and contact pin routing.
Vertical section through the center (YZ plane) reveals the internal bore structure of the cylindrical barrel (diameter ~10mm outer, ~7.4mm inner), the contact pin channels (2.0mm diameter), and the wall thickness of the housing (~1.2mm). Shows the internal cavity structure and contact pin routing.
Magnifies the center contact area showing the two small contact holes (approximately 1.4mm diameter) and their precise spacing, which is critical for proper electrical contact alignment and mating.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
