Assembly - Front View
OrthographicShows the main front profile including the central cross bore, top cap, and side mounting features; essential for overall height and front-facing hole locations.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the main front profile including the central cross bore, top cap, and side mounting features; essential for overall height and front-facing hole locations.
Reveals the angular orientation of the yoke arms, the top cap mounting layout, and the offset of the cross relative to the yoke centerline—critical for assembly alignment.
Displays the depth profile, the left yoke arm, and the internal bore of the left shaft; shows how the cross fits into the yoke and the bearing cap thickness.
A horizontal section through the mid-plane (Y = 100.65 mm, near centroid) reveals the internal bore of the cross, the bearing cap thickness, and the clearance between the cross and yoke arms.
A horizontal section through the mid-plane (Y = 100.65 mm, near centroid) reveals the internal bore of the cross, the bearing cap thickness, and the clearance between the cross and yoke arms.
Magnifies the fillet at the cross-to-yoke interface to ensure proper stress relief and avoid sharp edges that could cause fatigue failure.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
