AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the full longitudinal profile, including the conical nose, main cylindrical body, and tail fin assembly. Reveals the external control surfaces (handle and stabilizer) and overall height (Z-direction) for mounting and clearance planning.
Critical for showing the circular symmetry and diameter of the main hull (85 mm), the location of the two 8 mm mounting holes at Z=180 mm, and the 15 mm internal bore at Z=-90 mm. Also shows the offset of the handle attachment relative to the centerline.
Reveals the internal cutouts and mounting features on the right side of the hull (e.g., the 30 mm bore at Z=-70 mm and the 15 mm internal bore at Z=-90 mm). Shows the asymmetry of the handle and stabilizer relative to the main axis, which is not visible in Front or Top views.
Reveals the internal wall thickness (10 mm between 85 mm outer and 65 mm inner diameter at mid-length), the 15 mm internal bore at Z=-90 mm, and the 30 mm bore at Z=-70 mm. Shows the concentricity of the internal bores and the location of the 15 mm internal flange at Z=-90 mm.
Reveals the internal wall thickness (10 mm between 85 mm outer and 65 mm inner diameter at mid-length), the 15 mm internal bore at Z=-90 mm, and the 30 mm bore at Z=-70 mm. Shows the concentricity of the internal bores and the location of the 15 mm internal flange at Z=-90 mm.
Magnifies the 15 mm internal bore at Z=-90 mm and the 15 mm internal flange at Z=-90 mm, which are critical for sealing and interface with internal components. The detail shows the precise location of the 15 mm bore relative to the 85 mm outer diameter.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
