AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
The Front view provides the primary orthographic projection, clearly showing the overall length, the console layout, the hatch, and the motor mount at the rear, which are critical for understanding the part's function and fit.
The Top view is essential for showing the full planar dimensions, including the boat's overall length and width, the location of the console, and the structural support frame, which are not visible in the Front view.
The Left view reveals the side profile, including the depth of the console, the thickness of the hull, and the mounting structure for the motor, providing information on the part's vertical and lateral dimensions.
The section cut reveals the internal wall thickness of the console and the structural frame, showing how the internal components are supported and how the motor mount is integrated.
This horizontal section shows the internal cavity of the console, including the depth of the storage area and the placement of internal components like the battery or control box.
The section cut reveals the internal wall thickness of the console and the structural frame, showing how the internal components are supported and how the motor mount is integrated.
This horizontal section shows the internal cavity of the console, including the depth of the storage area and the placement of internal components like the battery or control box.
This detail view magnifies the motor mount and the shaft, showing the precise diameter and alignment of the mounting hole and the shaft, which are critical for assembly.
This detail view focuses on the console hatch, showing the dimensions of the rectangular opening and the circular lock, which are important for fit and function.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
