AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Primary view showing overall height, mounting interface, and critical internal features like the piston bore, internal linkage, and mounting holes. The Front_Hidden view confirms hidden internal geometry (e.g., internal channel for piston rod) that is essential for manufacturing and assembly.
Reveals the full width, bolt pattern layout, and the spatial relationship between the main housing and the actuator cylinder. Shows the location of the 4× M4 mounting holes and the 2× M6 through-holes for the actuator mount, which are critical for assembly and alignment.
Shows the depth profile, wall thicknesses, and the side-mounted actuator interface. The Right view is necessary because the Left view is nearly identical (mirrored), and the Right view provides the correct perspective for the actuator’s side connection and the rear flange thickness.
Reveals the internal bore of the main housing (8.0 mm diameter), the wall thickness (4.0 mm), and the internal channel for the piston rod. This section is critical for verifying the internal clearance and wall integrity, especially where the piston rod passes through the housing.
Reveals the internal bore of the main housing (8.0 mm diameter), the wall thickness (4.0 mm), and the internal channel for the piston rod. This section is critical for verifying the internal clearance and wall integrity, especially where the piston rod passes through the housing.
Magnifies the 2.5 mm diameter mounting holes near the left end of the housing, which are critical for attaching the actuator linkage. The detail ensures the small hole pattern (12 mm center-to-center) is clearly dimensioned and toleranced for proper fit.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
