Assembly - Front View
OrthographicThe Front view provides the primary orthographic projection, clearly showing the overall layout of the gimbal's main structure, including the arrangement of mounting holes and the central bore for the servo.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
The Front view provides the primary orthographic projection, clearly showing the overall layout of the gimbal's main structure, including the arrangement of mounting holes and the central bore for the servo.
The Top view reveals the planar arrangement of the components, which is essential for understanding the mounting pattern and the distribution of the bolt holes across the base.
The Left view is necessary to show the depth and thickness of the side components, which are symmetrical to the Right view, but provides a unique perspective for dimensioning the side wall thickness.
This section cut through the central bore reveals the internal wall thickness and the alignment of the internal shafts, which are critical for the mechanical integrity of the gimbal.
This horizontal section cut through the lower section exposes the internal structure and the alignment of the lower mounting points, ensuring the base is properly designed for stability.
This section cut through the central bore reveals the internal wall thickness and the alignment of the internal shafts, which are critical for the mechanical integrity of the gimbal.
This horizontal section cut through the lower section exposes the internal structure and the alignment of the lower mounting points, ensuring the base is properly designed for stability.
This detail view magnifies the central bore, showing the precise diameter and tolerances required for the servo shaft to fit correctly.
This detail view focuses on the bolt pattern, highlighting the exact spacing and diameter of the holes for secure mounting.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
