AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the full length of the aircraft, including nose, cockpit, main cabin, and tail. Reveals the vertical profile and key structural elements like the fuselage centerline, wing attachment points, and landing gear bay. Essential for overall size and layout understanding.
Provides the plan view showing the full span of the wings, the symmetry of the fuselage, and the arrangement of seats and internal systems. Critical for understanding the horizontal layout, wing geometry, and cabin width.
Shows the side profile with internal structure, including the floor, ceiling, and side wall thicknesses. Reveals the vertical stacking of systems and the location of bulkheads, doors, and windows. The right view is nearly identical due to symmetry, so only left is needed.
A horizontal section through the mid-fuselage (Z=0) reveals internal cabin structure, seat mounting points, floor beams, and the arrangement of the 3.0 mm wall thickness sections. Shows the internal diameter of the fuselage and the location of internal bulkheads.
A horizontal section through the mid-fuselage (Z=0) reveals internal cabin structure, seat mounting points, floor beams, and the arrangement of the 3.0 mm wall thickness sections. Shows the internal diameter of the fuselage and the location of internal bulkheads.
Magnifies a typical seat mounting hole pattern (3.0 mm diameter, 138.0 mm bolt circle) to show the precise location and spacing of fasteners. Critical for ensuring proper fit and alignment during assembly.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
